Grab some pliers and put some rubber gloves on. Turn off the water supply line. Open up the toilet lid. Flush the remaining water in the tank until you can access the fill valve on the inside. Using one hand, secure the fill valve inside the tank, and with your other hand tighten the bolt using the pliers. All the toilets in our 5 year old house have been leaking for a while now. The Geberit cistern flush valve is letting water leak past into the bowl. We've All two-piece toilets have bolts that connect the toilet tank to the toilet bowl. If the tank is disturbed, such as a person leans back and slightly moves th How to repair a cracked toilet Tanks - I did it and NO leaksNothing worst than coming home to a toilet tanks leak and a crack. After removing the tank and ha Turn the valve clockwise until it stops. Flush the toilet to drain water from the tank and bowl. Remove standing water in the tank or bowl, if necessary, by soaking it up with a sponge and wringing it out into a bucket. Wipe the porcelain dry. In this video, I replace the toilet tank to bow bolts, and the tank to bowl gasket, to fix a slow water leak between the tank and the bowl. This fix is fast, The average cost for fixing a broken toilet is $250 with a range of $150 to $400.Often, plumbers will charge a flat rate for basic toilet repairs. One of the highest costs associated with toilet While holding the plastic cup in place, turn on the water supply valve for five to 10 seconds only. The water will flush out any debris that may have been trapped inside the valve. Inspect the .

fixing a leaking toilet cistern